Category Archives: UAV Mini Talon

Mini UAV Talon Build #3

OK so I’ve documented the last two builds via various blogs and videos, this is just a quick collection of pictures and notes from build #3. Few things to note on this build. As tidy external appearance as possible. GPS … Continue reading

Posted in UAV Mini Talon | Tagged | 3 Comments

Bit of NCR18650B testing done this week

4S1P – NCR18650B Discharge Tests cutoff @ 3V/cell1.9Amp drain = 3005mah expended quickly recovers to 3.45v/cell off load – No temperature difference.3Amp drain = 2800mah expended quickly recovers to 3.35v/cell off load – 8 degree Celsius temperature rise. Thoughts:a 4S3P … Continue reading

Posted in FPV, UAV Mini Talon | Tagged | Leave a comment

UAV Mini Talon Build Pt5 Control Horns

Well after a few flights it has become apparent how bad the stock control horns are, theyre brittle and are only held in place by glue to the foam which is very bad. I’ve decided to change mine for something … Continue reading

Posted in UAV Mini Talon | Tagged | Leave a comment

UAV Mini Talon Build Post Build Summary Video

Maiden Video and flight thoughts coming soon but in the mean time    

Posted in UAV Mini Talon | Tagged | Leave a comment

UAV Mini Talon Build Pt4

Blogs coming in thick and fast to recap Part1 Part2 & lastly Part3 In my last blog Graham Bowers made reference to the fact that i would be running elongated long power lines down to the ESC. For those not in … Continue reading

Posted in UAV Mini Talon | Tagged | Leave a comment

UAV Mini Talon Build Pt3

So following on from Part1 and Part2 here goes another picture heavy post along with more build notes / thoughts. I wanted to make a tray using the centre section so i can mount the ET vector on, so out … Continue reading

Posted in UAV Mini Talon | Tagged | 9 Comments

UAV Mini Talon Build Pt2

  Back again, this follows on from Pt1 which can be found here ,this post is more of a collection of pictures, “dry fits” and a thought collection process just to see how everything fits together along with any thoughts. I … Continue reading

Posted in UAV Mini Talon | Tagged | 7 Comments

UAV Mini Talon Build Pt1

Well here we are again at the start of a fresh new build The requirements of this build were to be small and light enough to carry in a backpack but capable of doing 40Km trips on 4S5000-6000mah lipo’s. I … Continue reading

Posted in UAV Mini Talon | Tagged | 3 Comments