Monthly Archives: August 2013

Bixler 2 Wing damage (first crash)

Well it had to happen sooner or later my first crash, and it ripped the wing tip off OUCH! Out came the Gorillaglue and the GFR tape and off to work i went. After much cleaning glueing and taping it … Continue reading

Posted in RC EP Bixler 2 | Leave a comment

Bixler 2, Haiyin 3S2650 Lipo’s

Quick post about 2 new lipo packs I’ve just got. These are the 3S2650 Haiyin’s and they’re think but long And they will fit in the B2 cockpit but only just and at an angle. I’ve yet yo give them … Continue reading

Posted in RC EP Bixler 2 | Leave a comment

Bixler 2 SmallpartsCNC Motor Mount Thrust angle.

I’ve been out a few times with my B2 and one of the things that’s become apparent on both launch and on hard WOT (Wide Open Throttle) use is that the plane dips due to the motor thrust angle which … Continue reading

Posted in RC EP Bixler 2 | 1 Comment

Bixler 2 1400KV Motor APC 8x4E Prop

For those wondering how the 1400KV motor is, let me tell you its got poke , I’ve opted for an APC 8x4E Prop and just with it on the deck this thing pushes. Had to turn prop round as i … Continue reading

Posted in RC EP Bixler 2 | Leave a comment

Adding the electrics.

OK so i’m nearing the end, all my electrics are here and its time to try and organise the mass of wires you will have. I ended up with the below. Note the size of the APC 8x4E prop on … Continue reading

Posted in RC EP Bixler 2 | Leave a comment

Bixler 2 Externally mounted ESC

OK so i know how ESC’s can got nice and toasty and we know how heat + foam =   So with that in mind i knew i needed to cut another hole. (Yay out comes the knife) Originally i … Continue reading

Posted in RC EP Bixler 2 | Leave a comment

Bixler 2 Stock Motor & Mount Removal.

First up DONT RUSH this part, i don’t care how keen you are to get this done, just DONT RUSH.!! I’m the most impatient person in the world so i purposely ordered my parts a few days at a time … Continue reading

Posted in RC EP Bixler 2 | Leave a comment

Adobe Reader X (Access Denied Error)

Hi I have just come across an issue with opening PDF files from the network in Adobe X. It sometimes give you an error saying access denied. The below will fix the issue.   Open Acrobat Reader X Click on … Continue reading

Posted in IT | Leave a comment

Windows wont let you install software due to pending restart.?

An oldie but a good one none the less, ever come across a server which wont let you install something due to is thinking it needs a reboot.? Well heres the culprit, get rid of anything in the key and … Continue reading

Posted in IT | Leave a comment

Replmon display AD replication latency between sites.

Formatting the output of replmon can be a pain so heres a simple one which will show replication latency times between dc’s REPADMIN /REPLSUM * /BYSRC /BYDEST /SORT:ERROR

Posted in IT | Leave a comment